| |
Main
Date: 09 Dec 2006 20:27:52
From: Brewer Bob
Subject: LM Portafilter Mod for Silvia
|
I know this has been discussed before and I have seen (I think) all of
the threads on this subject. I just need to know 'exactly' where to
file the ears down. In some of the threads, it was mentioned that when
not done right, the PF will be at the 7 oclock position tather than the
5 oclock. So, does that mean i shave off 3 mms from the wide side of
each ear?
Brewer Bob
|
|
| |
Date: 10 Dec 2006 10:39:41
From:
Subject: Re: LM Portafilter Mod for Silvia
|
Brewer Bob wrote:
> stan.shire@gmail.com wrote:
>
> >stan.sh...@gmail.com wrote:
> >
> >
> >>Brewer Bob wrote:
> >>
> >>
> >>>I know this has been discussed before and I have seen (I think) all of
> >>>the threads on this subject. I just need to know 'exactly' where to
> >>>file the ears down. In some of the threads, it was mentioned that when
> >>>not done right, the PF will be at the 7 oclock position tather than the
> >>>5 oclock. So, does that mean i shave off 3 mms from the wide side of
> >>>each ear?
> >>>
> >>>Brewer Bob
> >>>
> >>>
> >>Bob
> >>just put this up for you. Let me know if you need any other info
> >>Stan
> >>
> >>http://homepage.mac.com/sshire/PhotoAlbum3.htm
> >>
> >>
> >
> >Duh. the link should be
> >http://homepage.mac.com/sshire/PhotoAlbum3.html
> >
> >sorry
> >
> >
>
> Thanks Stan,
> How did you protect the rest of the unit from the file in case of
> slipping ? Would duct tape work?
I wrapped it in a towel and clamped it it a vise. Used a hand file, not
a grinder. Once you cut through the chrome, the brass files away
easily.
Stan
|
| | |
Date: 10 Dec 2006 18:46:50
From: Brewer Bob
Subject: Re: LM Portafilter Mod for Silvia
|
stan.shire@gmail.com wrote:
>Brewer Bob wrote:
>
>
>>stan.shire@gmail.com wrote:
>>
>>
>>
>>>stan.sh...@gmail.com wrote:
>>>
>>>
>>>
>>>
>>>>Brewer Bob wrote:
>>>>
>>>>
>>>>
>>>>
>>>>>I know this has been discussed before and I have seen (I think) all of
>>>>>the threads on this subject. I just need to know 'exactly' where to
>>>>>file the ears down. In some of the threads, it was mentioned that when
>>>>>not done right, the PF will be at the 7 oclock position tather than the
>>>>>5 oclock. So, does that mean i shave off 3 mms from the wide side of
>>>>>each ear?
>>>>>
>>>>>Brewer Bob
>>>>>
>>>>>
>>>>>
>>>>>
>
>
>
>
>>>>Bob
>>>>just put this up for you. Let me know if you need any other info
>>>>Stan
>>>>
>>>>http://homepage.mac.com/sshire/PhotoAlbum3.htm
>>>>
>>>>
>>>>
>>>>
>>>Duh. the link should be
>>>http://homepage.mac.com/sshire/PhotoAlbum3.html
>>>
>>>sorry
>>>
>>>
>>>
>>>
>>Thanks Stan,
>>How did you protect the rest of the unit from the file in case of
>>slipping ? Would duct tape work?
>>
>>
>
>I wrapped it in a towel and clamped it it a vise. Used a hand file, not
>a grinder. Once you cut through the chrome, the brass files away
>easily.
>Stan
>
>
I appreciate all the info. Thanks Stan.
Brewer Bob
|
| |
Date: 10 Dec 2006 10:01:46
From:
Subject: Re: LM Portafilter Mod for Silvia
|
stan.sh...@gmail.com wrote:
> Brewer Bob wrote:
> > I know this has been discussed before and I have seen (I think) all of
> > the threads on this subject. I just need to know 'exactly' where to
> > file the ears down. In some of the threads, it was mentioned that when
> > not done right, the PF will be at the 7 oclock position tather than the
> > 5 oclock. So, does that mean i shave off 3 mms from the wide side of
> > each ear?
> >
> > Brewer Bob
>
> Bob
> just put this up for you. Let me know if you need any other info
> Stan
>
> http://homepage.mac.com/sshire/PhotoAlbum3.htm
Duh. the link should be
http://homepage.mac.com/sshire/PhotoAlbum3.html
sorry
|
| | |
Date: 10 Dec 2006 18:08:27
From: Brewer Bob
Subject: Re: LM Portafilter Mod for Silvia
|
stan.shire@gmail.com wrote:
>stan.sh...@gmail.com wrote:
>
>
>>Brewer Bob wrote:
>>
>>
>>>I know this has been discussed before and I have seen (I think) all of
>>>the threads on this subject. I just need to know 'exactly' where to
>>>file the ears down. In some of the threads, it was mentioned that when
>>>not done right, the PF will be at the 7 oclock position tather than the
>>>5 oclock. So, does that mean i shave off 3 mms from the wide side of
>>>each ear?
>>>
>>>Brewer Bob
>>>
>>>
>>Bob
>>just put this up for you. Let me know if you need any other info
>>Stan
>>
>>http://homepage.mac.com/sshire/PhotoAlbum3.htm
>>
>>
>
>Duh. the link should be
>http://homepage.mac.com/sshire/PhotoAlbum3.html
>
>sorry
>
>
Thanks Stan,
How did you protect the rest of the unit from the file in case of
slipping ? Would duct tape work?
|
| |
Date: 10 Dec 2006 10:00:18
From:
Subject: Re: LM Portafilter Mod for Silvia
|
Brewer Bob wrote:
> I know this has been discussed before and I have seen (I think) all of
> the threads on this subject. I just need to know 'exactly' where to
> file the ears down. In some of the threads, it was mentioned that when
> not done right, the PF will be at the 7 oclock position tather than the
> 5 oclock. So, does that mean i shave off 3 mms from the wide side of
> each ear?
>
> Brewer Bob
Bob
just put this up for you. Let me know if you need any other info
Stan
http://homepage.mac.com/sshire/PhotoAlbum3.htm
|
|
