| |
Main
Date: 18 Jun 2007 08:39:40
From: Tim Blue
Subject: La Marzocco Fuji PID Settings
|
I was trolling on EspressoParts.com a few months ago and discovered
that if you purchase a PID kit from them they will include a "set of
parameters to place into the Fuji PID unit for best results when used
on La Marzocco espresso machines."
I contacted them asking if this parameter set could be purchased
separately and received no answer.
I currently have a Fuji PID attached to my La Marzocco and I am
wondering if anyone here has a good set of parameters for use with
this unit. I honestly have never changed the factory default
parameters on this unit.
TIA,
Tim Blue
www.timothyblue.com
|
|
| |
Date: 21 Jun 2007 11:39:41
From: Tim Blue
Subject: Re: La Marzocco Fuji PID Settings
|
Greg,
My machine is a 3 group so it is possible that your settings will not
work as well as they could, but I think they will probably be better
than no tweaking at all.
I will find out.
~Tim
On Jun 19, 11:46 am, gscace <gregory.sc...@nist.gov > wrote:
> On Jun 18, 3:14 pm, Tim Blue <t...@timothyblue.com> wrote:
>
>
>
> > Thanks for the tip!
>
> > I found them and am looking forward to trying them out.
>
> > ~Tim
>
> > On Jun 18, 2:56 pm, Barry Jarrett <b...@rileys-coffee.com> wrote:
>
> > > I think they were originally posted on a.c, so search google groups:
> > > PID Fuji Marzocco Scace
>
> > > On Mon, 18 Jun 2007 08:39:40 -0700, Tim Blue <t...@timothyblue.com>
> > > wrote:
>
> > > >I was trolling on EspressoParts.com a few months ago and discovered
> > > >that if you purchase a PID kit from them they will include a "set of
> > > >parameters to place into the Fuji PID unit for best results when used
> > > >on La Marzocco espresso machines."
>
> > > >I contacted them asking if this parameter set could be purchased
> > > >separately and received no answer.
>
> > > >I currently have a Fuji PID attached to my La Marzocco and I am
> > > >wondering if anyone here has a good set of parameters for use with
> > > >this unit. I honestly have never changed the factory default
> > > >parameters on this unit.
>
> > > >TIA,
> > > >Tim Blue
> > > >www.timothyblue.com
>
> Hi there:
>
> You didn't mention if your machine was a 2-group or 3. The parameters
> that I published were for a 2-group. I'd imagine that they will be
> different for a 3-group. A 4-group will be similar to a 2, since they
> share brew boiler sizes. Use the parameters with a grain of salt. I
> don't claim that they're the gospel or anything.
>
> -Greg
|
| |
Date: 21 Jun 2007 11:38:22
From: Tim Blue
Subject: Re: La Marzocco Fuji PID Settings
|
The URL I found the information at is here:
http://static.zoovy.com/merchant/espressoparts2/EP_PID_INSTRUCTIONS.pdf
This appears to be the one from EspressoParts which has the settings
on the last page.
~Tim
On Jun 18, 4:20 pm, "I- >Ian" <some...@nowhere.com> wrote:
> On Mon, 18 Jun 2007 12:14:38 -0700, Tim Blue <t...@timothyblue.com>
> wrote:
>
> >Thanks for the tip!
>
> >I found them and am looking forward to trying them out.
>
> >~Tim
>
> A true measure of your appreciation of alt.coffee would include
> posting the tiny URL of the post to the 'group. ;-)
|
| | |
Date: 21 Jun 2007 12:51:00
From: I->Ian
Subject: Re: La Marzocco Fuji PID Settings
|
Thanks!
This may be helpful on tuning a PID.
http://www.omega.com/temperature/Z/pdf/z115-117.pdf
On Thu, 21 Jun 2007 11:38:22 -0700, Tim Blue <tim@timothyblue.com >
wrote:
>The URL I found the information at is here:
>
>http://static.zoovy.com/merchant/espressoparts2/EP_PID_INSTRUCTIONS.pdf
>
>This appears to be the one from EspressoParts which has the settings
>on the last page.
>
>~Tim
>
>On Jun 18, 4:20 pm, "I->Ian" <some...@nowhere.com> wrote:
>> On Mon, 18 Jun 2007 12:14:38 -0700, Tim Blue <t...@timothyblue.com>
>> wrote:
>>
>> >Thanks for the tip!
>>
>> >I found them and am looking forward to trying them out.
>>
>> >~Tim
>>
>> A true measure of your appreciation of alt.coffee would include
>> posting the tiny URL of the post to the 'group. ;-)
>
|
| |
Date: 19 Jun 2007 08:46:34
From: gscace
Subject: Re: La Marzocco Fuji PID Settings
|
On Jun 18, 3:14 pm, Tim Blue <t...@timothyblue.com > wrote:
> Thanks for the tip!
>
> I found them and am looking forward to trying them out.
>
> ~Tim
>
> On Jun 18, 2:56 pm, Barry Jarrett <b...@rileys-coffee.com> wrote:
>
> > I think they were originally posted on a.c, so search google groups:
> > PID Fuji Marzocco Scace
>
> > On Mon, 18 Jun 2007 08:39:40 -0700, Tim Blue <t...@timothyblue.com>
> > wrote:
>
> > >I was trolling on EspressoParts.com a few months ago and discovered
> > >that if you purchase a PID kit from them they will include a "set of
> > >parameters to place into the Fuji PID unit for best results when used
> > >on La Marzocco espresso machines."
>
> > >I contacted them asking if this parameter set could be purchased
> > >separately and received no answer.
>
> > >I currently have a Fuji PID attached to my La Marzocco and I am
> > >wondering if anyone here has a good set of parameters for use with
> > >this unit. I honestly have never changed the factory default
> > >parameters on this unit.
>
> > >TIA,
> > >Tim Blue
> > >www.timothyblue.com
Hi there:
You didn't mention if your machine was a 2-group or 3. The parameters
that I published were for a 2-group. I'd imagine that they will be
different for a 3-group. A 4-group will be similar to a 2, since they
share brew boiler sizes. Use the parameters with a grain of salt. I
don't claim that they're the gospel or anything.
-Greg
|
| |
Date: 18 Jun 2007 12:14:38
From: Tim Blue
Subject: Re: La Marzocco Fuji PID Settings
|
Thanks for the tip!
I found them and am looking forward to trying them out.
~Tim
On Jun 18, 2:56 pm, Barry Jarrett <b...@rileys-coffee.com > wrote:
> I think they were originally posted on a.c, so search google groups:
> PID Fuji Marzocco Scace
>
> On Mon, 18 Jun 2007 08:39:40 -0700, Tim Blue <t...@timothyblue.com>
> wrote:
>
> >I was trolling on EspressoParts.com a few months ago and discovered
> >that if you purchase a PID kit from them they will include a "set of
> >parameters to place into the Fuji PID unit for best results when used
> >on La Marzocco espresso machines."
> >
> >I contacted them asking if this parameter set could be purchased
> >separately and received no answer.
> >
> >I currently have a Fuji PID attached to my La Marzocco and I am
> >wondering if anyone here has a good set of parameters for use with
> >this unit. I honestly have never changed the factory default
> >parameters on this unit.
> >
> >TIA,
> >Tim Blue
> >www.timothyblue.com
|
| | |
Date: 18 Jun 2007 13:20:57
From: I->Ian
Subject: Re: La Marzocco Fuji PID Settings
|
On Mon, 18 Jun 2007 12:14:38 -0700, Tim Blue <tim@timothyblue.com >
wrote:
>Thanks for the tip!
>
>I found them and am looking forward to trying them out.
>
>~Tim
A true measure of your appreciation of alt.coffee would include
posting the tiny URL of the post to the 'group. ;-)
|
| |
Date: 18 Jun 2007 18:56:12
From: Barry Jarrett
Subject: Re: La Marzocco Fuji PID Settings
|
I think they were originally posted on a.c, so search google groups:
PID Fuji Marzocco Scace
On Mon, 18 Jun 2007 08:39:40 -0700, Tim Blue <tim@timothyblue.com >
wrote:
>I was trolling on EspressoParts.com a few months ago and discovered
>that if you purchase a PID kit from them they will include a "set of
>parameters to place into the Fuji PID unit for best results when used
>on La Marzocco espresso machines."
>
>I contacted them asking if this parameter set could be purchased
>separately and received no answer.
>
>I currently have a Fuji PID attached to my La Marzocco and I am
>wondering if anyone here has a good set of parameters for use with
>this unit. I honestly have never changed the factory default
>parameters on this unit.
>
>TIA,
>Tim Blue
>www.timothyblue.com
|
|
