coffee-forum.net
Promoting coffee discussion.

Main
Date: 28 Jul 2007 13:51:09
From: Salvo04
Subject: OEM part# for procon pump used in Cimbali M21?
It looks like the rotary pump in my Cimbai Junior has some sort of
internal gasket or bearing failure. Water streams out of a small
vent(?) hole at the botton of the pump casing where the pump meets the
motor.

I removed the pump to clean the internal filter but didnt see a part
number.

Anyone know the OEM part# or specs for the procon pump used in the
Cimbali M21?

Thanks





 
Date: 29 Jul 2007 02:07:33
From:
Subject: Re: OEM part# for procon pump used in Cimbali M21?

You need to have the pump rebuilt!

On Jul 28, 4:48 pm, Salvo04 <Salv...@gmail.com > wrote:
> How can you tell which one is the problem?
>
> On Jul 28, 6:33 pm, "Ed Needham" <e...@NOSPAMhomeroaster.com> wrote:
>
> > It might be an overpressure outlet.
>
> > "Salvo04" <Salv...@gmail.com> wrote in message
>
> >news:1185655869.839878.37830@l70g2000hse.googlegroups.com...
>
> > > It looks like the rotary pump in my Cimbai Junior has some sort of
> > > internal gasket or bearing failure. Water streams out of a small
> > > vent(?) hole at the botton of the pump casing where the pump meets the
> > > motor.
>
> > > I removed the pump to clean the internal filter but didnt see a part
> > > number.
>
> > > Anyone know the OEM part# or specs for the procon pump used in the
> > > Cimbali M21?
>
> > > Thanks- Hide quoted text -
>
> > - Show quoted text -




 
Date: 28 Jul 2007 16:48:37
From: Salvo04
Subject: Re: OEM part# for procon pump used in Cimbali M21?
How can you tell which one is the problem?

On Jul 28, 6:33 pm, "Ed Needham" <e...@NOSPAMhomeroaster.com > wrote:
> It might be an overpressure outlet.
>
> "Salvo04" <Salv...@gmail.com> wrote in message
>
> news:1185655869.839878.37830@l70g2000hse.googlegroups.com...
>
>
>
> > It looks like the rotary pump in my Cimbai Junior has some sort of
> > internal gasket or bearing failure. Water streams out of a small
> > vent(?) hole at the botton of the pump casing where the pump meets the
> > motor.
>
> > I removed the pump to clean the internal filter but didnt see a part
> > number.
>
> > Anyone know the OEM part# or specs for the procon pump used in the
> > Cimbali M21?
>
> > Thanks- Hide quoted text -
>
> - Show quoted text -




 
Date: 28 Jul 2007 18:33:46
From: Ed Needham
Subject: Re: OEM part# for procon pump used in Cimbali M21?
It might be an overpressure outlet.

"Salvo04" <Salvo04@gmail.com > wrote in message
news:1185655869.839878.37830@l70g2000hse.googlegroups.com...
> It looks like the rotary pump in my Cimbai Junior has some sort of
> internal gasket or bearing failure. Water streams out of a small
> vent(?) hole at the botton of the pump casing where the pump meets the
> motor.
>
> I removed the pump to clean the internal filter but didnt see a part
> number.
>
> Anyone know the OEM part# or specs for the procon pump used in the
> Cimbali M21?
>
> Thanks
>