| |
Main
Date: 11 Oct 2006 12:14:32
From: Shadd
Subject: Need help with Gushing Quickmill Andreja
|
Every time I backflush with detergent, it seems to screw with my
machine. Eventually after a week or so, it resumes normal function.
My boiler pressure goes up, from 1.4 max to 2.1. The machine seems to
easily choke up and also I have a leak during the pull from where the
lever ties in to the three way valve. Even normally I get dripping
from there with good espresso, but now I have quite the stream.
I dismantled the parts where the activating lever inserts into the
group. I found a rubber stopper that seats onto a shaft which appeared
slightly deteriorated. The machine is only 1 1/2 years old. Any
thoughts? Is this part replaceable?
Any help or thoughts appreciated
Shadd
|
|
| |
Date: 12 Oct 2006 13:04:57
From: Todd94590
Subject: Re: Need help with Gushing Quickmill Andreja
|
I've got this unit, too. Has only been running for a couple of months,
thus
no issues with the machine.
I'd suggest contacting either chriscoffee or quickmill directly to get
a
replacement part.
Todd in Vallejo
\
> leak during the pull from where the
> lever ties in to the three way valve.
>
>
> stopper that seats onto a shaft which appeared
> slightly deteriorated.
> thoughts? Is this part replaceable?
>
> Any help or thoughts appreciated
>
> Shadd
|
|
