| |
Main
Date: 13 Aug 2006 01:21:20
From: phil
Subject: mazzer super jolly
|
Where is the locking screw located on the adjustment ring on my mazzer
super jolly.The ring will not move and I cannot replace the upper
burr.Any help please
|
|
| |
Date: 13 Aug 2006 10:49:37
From: Phil P
Subject: Re: mazzer super jolly
|
phil wrote:
> Where is the locking screw located on the adjustment ring on my mazzer
> super jolly.The ring will not move and I cannot replace the upper
> burr.Any help please
The locking screw is the countersunk screw fitted in either of two
positions in the top surface of the adjustment ring. Many people just
take this out and leave it out so you may not have one fitted if it is
second-hand.
With the screw removed, you undo the adjuster ring by rotating it
_clockwise_ which is contrary to what you might expect . . .
|
| |
Date: 14 Aug 2006 19:12:55
From: phil
Subject: Re: mazzer super jolly
|
Thanks for the help.I just had to use a little more force to turn it.
phil wrote:
> I looked on the top surface and everywhere around the adj. ring but
> never found a screw.Guess I will just keep putting more pressure on it
> and see if it will turn or break.Thank you for your reply to my
> question.If you have any other suggestions I would really appreciate it
>
> Phil P wrote:
> > phil wrote:
> > > Where is the locking screw located on the adjustment ring on my mazzer
> > > super jolly.The ring will not move and I cannot replace the upper
> > > burr.Any help please
> >
> > The locking screw is the countersunk screw fitted in either of two
> > positions in the top surface of the adjustment ring. Many people just
> > take this out and leave it out so you may not have one fitted if it is
> > second-hand.
> >
> > With the screw removed, you undo the adjuster ring by rotating it
> > _clockwise_ which is contrary to what you might expect . . .
|
| |
Date: 14 Aug 2006 09:33:57
From: phil
Subject: Re: mazzer super jolly
|
I looked on the top surface and everywhere around the adj. ring but
never found a screw.Guess I will just keep putting more pressure on it
and see if it will turn or break.Thank you for your reply to my
question.If you have any other suggestions I would really appreciate it
Phil P wrote:
> phil wrote:
> > Where is the locking screw located on the adjustment ring on my mazzer
> > super jolly.The ring will not move and I cannot replace the upper
> > burr.Any help please
>
> The locking screw is the countersunk screw fitted in either of two
> positions in the top surface of the adjustment ring. Many people just
> take this out and leave it out so you may not have one fitted if it is
> second-hand.
>
> With the screw removed, you undo the adjuster ring by rotating it
> _clockwise_ which is contrary to what you might expect . . .
|
|
